Single-phase industrial vacuum with three by-pass motors, large filtering surface and semi-automatic filter cleaning system. It is ideal for dry and difficult dust. It can be connected to a floor polisher or work in other situations where the dust is fine and binding. The vacuum cleaner is fitted with a practical Longopac® bagging system.
The vacuum is generated by 3 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level.
AIRPULSE FILTER CLEANING SYSTEM
The vacuum cleaner is equipped with a new Airpulse cleaning system. Thanks to the different pressure between the outside and the inside of the vacuum cleaner, the system generates a jet flow inside the cartridge, detaching the dust from the filter surface. It is a fast and efficient way to keep the filter clean during the operations, without stopping the motors.
The filtration is guaranteed by a sturdy polyester filtering cartridge. The cartridge is made to ensure large filter surface in a compact space. This way air can pass through when the filter is dirty too. The filter is M Class (BIA | EN 60335-2-69) certified. It stops the particles till 1 micron, preserving the motors and the operator.
The collected material is collected inside a sturdy plastic bag named Longopac®. This bag is 20 meters long and it is rolled up at the bottom of the filter chamber. When the vacuum cleaner is stopped, the material automatically falls into the bag. When the bag is full the operator can seal it, cut it and safety store away the collected dust. Then it is possible to start with a new bag. This operation can be made without any contact between operator and material.
|Air-Flow (incl\. filters)||570 m3|
|Dimensions||660 x 800 x 1515 mm|
|Filter Surface Area||40,000 cm3|
|Hose Ø||50 mm|
|Noise Level||72 dB|
|Power||3,9 - 5,2 kW|